← Back to blog

Cybersecurity Threat Reports: How to Read Them and Use Them

November 21, 2026
Cybersecurity Threat Reports: How to Read Them and Use Them

A cybersecurity threat report is a document that describes who is attacking, how, whom they target and what defenders should do about it. The best ones are free and written by governments and large security firms. Most are written for security teams, though, so a home user, gamer or creator has to know which parts to read and which to skip. This guide shows you how to do that. It also shows how to turn a report's findings into checks you can run on your own connection, and our live outage and cyber attack news page collects public-source reporting in one place so you don't have to chase PDFs.

Nextwatchaitool
Check Your Connection Health
Compare your speed and responsiveness, then use AI-assisted guidance to investigate connection issues highlighted by threat reports.
Visit

TL;DR

  • A threat report describes attackers' methods, targets and indicators, plus advice. NIST defines it as a prose document covering tactics, techniques and procedures (TTPs), actors and targeted systems.
  • Government annual reports, such as ENISA's and Australia's ACSC, are the broadest and best documented. Vendor reports are sharper on current campaigns.
  • The 2025 ENISA report found phishing behind about 60% of observed intrusions, so account hygiene beats exotic defenses.
  • Read the executive summary first, check the scope and period, and keep only the advice that fits your setup.
  • You can turn most findings into checks: speed and latency baselines, VPN performance, router health and outage monitoring.

Table of Contents

What a cybersecurity threat report actually is

NIST, the US standards agency, defines a threat intelligence report as a prose document describing TTPs (the tactics, techniques and procedures attackers use), the actors, the types of systems and information targeted, and other threat-related information. In plain terms: who, how, against what, and what to do.

NIST's guide to sharing cyber threat information adds a useful distinction. Raw threat information becomes threat intelligence once it is aggregated, analyzed and given context for decision-making. A list of bad IP addresses is data. A report explaining which groups use them, against which industries, and what to change is intelligence.

Most reports contain the same building blocks. Microsoft's documentation lists them: attacker identity, objectives, campaigns, TTPs, indicators of compromise, victimology and mitigation. Three terms deserve a one-line explanation:

  • Indicators of compromise (IOCs): concrete traces of an attack, such as malicious web addresses or file fingerprints (hashes). They matter to network defenders and rarely to home users.
  • Victimology: which industries and regions the attackers hit. This is the part that tells you whether the report concerns you.
  • MITRE ATT&CK: a public catalog of attacker behavior. Reports tag techniques with codes like T1566 (phishing), so you can look up what each one means.

The main types of reports, and who writes them

Not every report answers the same question. Knowing the type tells you what to expect before you open the PDF.

TypeTypical authorWhat it coversBest for
Annual threat landscapeGovernment agenciesA year of incidents, trends, sectors, attack typesUnderstanding the big picture
Vendor annual or global reportLarge security firmsCampaigns, actors and trends seen in their own customer dataCurrent attacker behavior
Incident or campaign reportIncident-response firms, agenciesOne attack or one actor, with timeline and indicatorsLearning how a specific breach worked
Flash alert or advisoryAgencies, vendorsA fast warning about an active threatKnowing what to patch now

Government reports lean on public incident data and published methods. ENISA, the European Union's cybersecurity agency, states its scope and scores its sources for accuracy, relevancy and comprehensiveness. Vendor reports draw on what each firm sees through its own customers, which makes them timely but narrower. Both are useful, and reading one of each gives a better picture than either alone.

If you are in the US, the agency page worth bookmarking is CISA's Known Exploited Vulnerabilities catalog, the agency's list of software flaws that attackers are actively using. It is short, updated as threats appear, and tells you which updates cannot wait.

What recent reports say are the most common threats

Two things stand out across recent reports: attacks still start with people and logins, and AI is speeding both attackers and defenders.

Phishing and stolen logins lead the way

ENISA's 2025 threat landscape covers July 2024 to June 2025 and nearly 4,900 curated incidents. It found phishing was the dominant way in, at about 60% of observed cases, followed by vulnerability exploitation at 21.3% and botnets at 9.9%. After intrusions, ransomware, banking trojans and infostealers made up 87.3% of the malicious code deployed. Infostealers are programs that quietly collect saved passwords and session cookies from a device, which is why one infected laptop can expose many accounts.

Reported shares of phishing, vulnerability exploitation and botnets

PwC's 2026 Annual Threat Dynamics report, based on analysis through 2025 and into early 2026, describes the landscape as identity-driven and AI-accelerated, with attackers increasingly logging in rather than breaking in. A single compromised credential, connector or device can cascade. That is as true for a creator's YouTube and ad accounts as for a company's cloud.

Availability attacks and denial of service

ENISA's 2025 report says DDoS made up about 76.7% of recorded incident types, driven by hacktivists. A DDoS attack floods a service with traffic until it slows or drops. Most are aimed at organizations, not households, but they explain many of the large outages that show up as sudden global slowdowns. ENISA's earlier edition, covering July 2023 to June 2024, also ranked threats against availability at the top of seven prime threats, alongside ransomware, malware, social engineering, data threats, information manipulation and supply chain attacks.

AI as a force multiplier

ENISA reports that by early 2025, AI-supported phishing campaigns reportedly represented more than 80 percent of observed social engineering activity worldwide. CrowdStrike's 2026 Global Threat Report describes AI as both a force multiplier for attacks and a new attack surface, with 90 or more organizations having legitimate AI tools exploited to generate malicious commands and steal data. For you, the practical meaning is that phishing messages are better written and harder to spot by typos alone.

Another country's numbers

Reports are regional. Australia's ACSC annual report for FY2024-25 found that, among critical infrastructure incidents, compromised assets, networks or infrastructure made up 55%, DoS/DDoS 23% and compromised accounts or credentials 19%. It also flags business email compromise among the top self-reported business cybercrime threats. Telstra customers will recognize the setting. The patterns match ENISA's: logins and exposed systems are the weak points.

How to read a threat report in ten minutes

You do not need to read 100 pages. This routine gets the value out of most reports, and each step shows where readers usually go wrong.

1. Check who wrote it, when, and for what period

Find the period covered on the first pages. ENISA's 2025 edition covers July 2024 to June 2025, and the ACSC report covers a financial year. A figure from a past period is a record of that period, not a forecast. A report on one incident is also not a picture of the whole threat landscape, and mixing the two is the commonest error.

2. Read the executive summary first

The summary tells you whether the threat concerns you. Reports aimed at executives, security managers and analysts differ in depth, so stop at the level you can act on. If the summary talks only about industrial control systems or government ministries, you can leave the rest.

3. Find the victimology

Look for the sector and region. ENISA found public administration was the main target sector at 38%. A household is rarely in that bucket, but the methods used against it (phishing, stolen credentials, unpatched devices) are the same ones used against individuals.

4. Judge the evidence

Good reports say how sure they are. The UK government's guidance on sharing threat intelligence says information should be accurate, up to date and reliable, with caveats where credibility is uncertain, and that uncorroborated information should be marked as such. Look for confidence wording such as high, moderate or low, a described method and a stated scope. Be wary of precise-sounding statistics with no stated sample or period. Security firms also often give the same attacker group different names, so one group may appear under several labels.

5. Map the findings to what you own

Take each named technique or threat and ask whether it applies to your setup. A phishing finding applies to your email and social accounts. A vulnerability finding applies to your router, phone and operating system. A VPN finding applies if you route traffic through one. Drop everything else.

6. Keep only the recommendations that fit

Reports end with advice written for large organizations, such as network segmentation and detection rules. Keep the ones that translate: update software, use multi-factor authentication (a second proof of identity beyond the password), and watch for sudden changes in how your network behaves.

Turning a report into checks on your own connection

Most reports talk about organizations, but several findings show up on a home or creator network as symptoms you can measure. A report will not tell you whether your own network is affected. Measurements will tell you whether something has changed.

Build a baseline. Run a speed test at quiet and busy times and note download, upload and latency (the delay before data starts to move). With a baseline you can tell a provider problem from a device problem. Our internet speed test and diagnostics measures download speed, upload speed and connection responsiveness in the browser, and its optional Network Detective explains the results in plain language and helps troubleshoot Wi-Fi and connectivity problems.

Check whether a slowdown is wider than your home. The availability attacks that dominate ENISA's incident counts often show up for users as a service that slows for everyone. If one site or platform is slow while the rest of the web is fine, look at outage reporting before you reset your router.

Test your VPN against your plain connection. Many readers install a VPN after reading about threats. A VPN adds a hop, so compare speed and latency with and without it. Our VPN speed test lets you do that for your own connection.

Check the work-from-home and streaming paths. If you stream or upload video, a degraded uplink can be a hardware or ISP issue, not an attack, and the streaming readiness test and the YouTube speed test show what your connection delivers to those platforms. Starlink users can use the Starlink connection analyzer, AT&T customers the AT&T speed test, and Telstra customers the Telstra speed test.

Turning a report into checks on your own connection

Why creators and gamers should care

The PwC finding about identity applies directly to creators. If attackers log in as you, they take the channel, the ad revenue and the audience. Gamers face a similar pattern: stolen accounts and fake download links ride on the same phishing methods ENISA ranks first. Two habits cover most of the risk: turn on multi-factor authentication for every account that holds money, followers or purchases, and download games and updates only from the official store or launcher.

If you track earnings, an unexplained drop in views or revenue is worth a look at both account security and the numbers themselves. Our YouTube RPM calculator and X RPM calculator show their assumptions, so you can see what a normal range looks like for your audience before you suspect something else.

Keeping up with threats without reading every PDF

The busiest part of the threat world moves weekly: new exploited flaws, big outages, newly disclosed breaches. Annual reports are too slow for that, and advisories are too technical. We built the Live Outage Tracker & Cyber Attack News page to bring public-source outage and cybersecurity reporting into one view, and its free to use. Use it for the weekly pulse, and use the annual government reports for the trend.

Nextwatchaitool

When something feels off, run the speed test and Network Detective first. It takes less than a minute, costs nothing, and gives you a measurement to compare against your baseline.

A simple routine to follow

  1. Monthly: skim one government or vendor report summary, or the key findings page, and note anything that touches your accounts or devices.
  2. Weekly: check outage and attack news, and install pending updates, starting with anything on CISA's exploited vulnerabilities list that affects your devices.
  3. After any slowdown or odd behavior: compare against your baseline speed and latency, then check whether others report the same problem.
  4. After any suspicious email or login alert: change the password from a clean device and make sure multi-factor authentication is on. If money or identity documents are involved, contact your bank or the relevant authority right away.

FAQ

What is the difference between a threat report and a threat landscape report?

A threat report usually covers one attack or one actor, often written after an incident-response job. A threat landscape report, like ENISA's annual one, surveys thousands of incidents across a period. Read the first to understand how an attack works and the second to see what is most common.

What are the most common cybersecurity threats in these reports?

Phishing, exploited software vulnerabilities, ransomware, infostealers and denial-of-service attacks appear again and again. ENISA's 2025 edition put phishing at about 60% of observed intrusions. Identity theft and AI-assisted social engineering are the growth areas in the PwC and CrowdStrike reports.

How do I know whether a threat report is reliable?

Check the author, the period covered and the method. Reliable reports state their scope, say how sources were scored and mark uncertain claims with confidence levels. Be careful with statistics that have no stated period or sample.

Do I need to read the technical sections?

Not as a home user, creator or gamer. The executive summary, the victimology and the recommendations are enough. The indicators and ATT&CK tables are for security teams who can search their networks for them.

Sources

Created with BabyLoveGrowth's AI